Snap-on Motorized Loader Bedienungsanleitung PDF herunterladen (Seite 56)

4-12

Using the Multitest Toque Calbration System

5. Press ENTER to download the raw data list. The LED

display reads:

SENDING

6. Press ENTER again to return to measurements mode.

Downloading Data List to Personal Computer

1. Connect the accessory 2000-50-1 cable between the

2000-810-01 PRINTER port and the computer COM port.

For additional information on setting up printer or PC

ports, refer to Chapter 3—Set Up and Programming.

2. Set up your computer to receive serial communication.

Example:

If using an IBM compatible and Windows 95:

— Click on START—RUN to open the Terminal

program.

— Type TERMINAL.

— Press <Enter>.

3. Press RECALL DATA.

4. Press SEND/AUTO SEND. As shown in Figure 4-5, the

LCD display reads:

Download - upper line

+Date Time Raw - lower line, with the plus sign flashing

— To download the data list plus date-time stamp,

press ENTER. The LED display reads:

SENDING

— To download the raw data list, use right DIGIT to

select “Raw” on the LCD display. Then press

ENTER to download. The LED display reads:

SENDING

5. Press ENTER again to return to measurements mode.

6. Copy the data list to your chosen software.

Example:

If using an IBM compatible and Windows 95:

— Select EDIT—SELECT ALL, and then EDIT—COPY.

— Open the spreadsheet or data program being used.

— Select EDIT—PASTE in the program being used.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 101 102

Keine Kommentare

Snap-on Motorized Loader Bedienungsanleitung Seite 56